Sanyo STWxxxxCx & STWxxxxHx PTAC Configuration Guide
|
Remote Thermostat Interface |
Remote Thermostat Interface Image |
|
Screw Terminal |
 |
STWxxxxCx & STWxxxxHx Series Remote Thermostat Enable:
|
Step |
Image |
|
|
1 |
Unplug the PTAC |
|
|
2 |
Move dip switch CL2 to the down position |
 |
|
3 |
Plug the PTAC back in |
AN40400 - Screw terminal PTAC wiring harness color coding guide:
***Unused Anacove Wiring Harness wires should be removed from the Wiring Harness. Cut the wire off approximately 1/2" from the HVAC Controller end of the harness***
|
Anacove Wire Color |
STWxxxxCx & STWxxxxHx Remote Thermostat Interface |
|
Red |
R |
| Black |
C |
| White |
HT |
| Yellow |
CM |
| Green |
FM |
| Brown |
Not Used |
| Blue |
SV |
| Orange |
Not Used |