Friedrich VHAxxxxxxRTQ-x VTAC Configuration Guide
|
Remote Thermostat Interface |
Remote Thermostat Interface Image |
|
Screw Terminal |
|
VHAxxxxxRTQ-x Series Remote Thermostat Enable:
|
Steps |
|
|
1 |
There are no configuration settings to be made as the VTAC is always in remote thermostat mode |
AN40400 - Screw Terminal Wiring Harness color coding guide:
***Unused Anacove Wiring Harness wires should be removed from the Wiring Harness. Cut the wire off approximately 1/2" from the HVAC Controller end of the harness***
|
Anacove Wire Color |
VHAxxxxxRTQ-x Remote Thermostat Interface |
|
Red |
R |
|
Black |
C |
|
White |
W |
|
Yellow |
Y |
|
Green |
G |
|
Brown |
Not Used |
|
Blue |
B |
|
Orange |
Not Used |