Friedrich PZExxxxxA-x & PZHxxxxxA-x PTAC Configuration Guide
|
Remote Thermostat Interface |
Remote Thermostat Interface Image |
|
Screw Terminal |
 |
PZExxxxxA-x & PZHxxxxxA-x Series Remote Thermostat Enable:
|
Steps |
Image |
|
|
1 |
Unplug the PTAC |
|
|
2 |
Move dip switch 2 into the UP position. Make sure dip switch 1 is down. |
|
|
3 |
Plug the PTAC back in |
|
AN40400 - Screw terminal PTAC wiring harness color coding guide:
***Unused Anacove Wiring Harness wires should be removed from the Wiring Harness. Cut the wire off approximately 1/2" from the HVAC Controller end of the harness***
|
Anacove Wire Color |
PZExxxxxA-x & PZHxxxxxA-x Remote Thermostat Interface |
|
Red |
R |
|
Black |
C |
|
White |
W |
|
Yellow |
Y |
|
Green |
GL |
|
Brown |
GH |
|
Blue |
Not Used |
|
Orange |
O |
|
Friedrich PTAC HVAC Controller Gateway Mounting Placement |
 |