Fan Coil With 3 Speed Fan Configuration Guide
***The HVAC Controller Gateway should always be mounted as close to the return of the Fan Coil as possible.***
Fan Coil Remote Thermostat Enable:
|
Step |
|
|
1 |
There are no configuration settings to be made as a fan coil is always in remote thermostat mode |
Screw Terminal Wiring Harness color coding guide:
***Maximum output drive is 1 amp. Use an external relay if higher current is required.***
***Unused Anacove Wiring Harness wires should be removed from the Wiring Harness. Cut the wire off approximately 1/2" from the HVAC Controller end of the harness***
|
Anacove Wire Color |
Fan Coil Remote Thermostat Interface/Wiring |
|
Red |
24VAC |
| Black |
Common |
| White |
Heat Valve or Electric Heat |
| Yellow |
Cool Valve |
| Green |
Low Fan |
| Brown |
High Fan |
| Blue |
Medium Fan |
| Orange |
Not Used |