Amana AVH VTAC Configuration Guide
***The HVAC Controller Gateway should always be mounted as close to the return of the VTAC as possible***
|
Remote Thermostat Interface |
Remote Thermostat Interface Image |
|
Screw Terminal |
AVH Remote Thermostat Enable:
|
Step |
|
|
1 |
There are no configuration settings to be made as the VTAC is always in remote thermostat mode |
AN40400 - Screw terminal PTAC wiring harness color coding guide:
***Unused Anacove Wiring Harness wires should be removed from the Wiring Harness. Cut the wire off approximately 1/2" from the HVAC Controller end of the harness***
|
Anacove Wire Color |
AVH Terminal Remote Thermostat Interface |
|
Red |
R |
|
Black |
C |
|
White |
W |
|
Yellow |
Y |
|
Green |
GL |
|
Brown |
GH |
|
Blue |
B |
|
Orange |
Not Used |